ENCOR 350-401 対策テキスト無償提供

弊社では、「ENCOR 350-401」の対策教材、及び直近の出題状況を海外の協力校と連携し、無償で提供させて頂く予定です。
以前のR&S CCIEホルダーで、再認定の必要がある方もぜひご連絡ください。
※実際の試験の出題、合格を100%保証するものではないことをご了承ください。

以下、再度、弊社サービス・教材の紹介として、対策問題集からの抜粋です。
※実際の試験では、問題文は全て英語で、複数の選択肢から回答を選びます。

[問題例]

・サンプラー機能をルータのFlexibleNetFlowの設定に導入するとどのような影響がありますか?

<参照コンフィグ>

flow monitor FLOW-MONITOR-1
record netflow ipv6 original-input
exit
!
sampler SAMPLER-1
mode deterministic 1 out-of 2
exit
!
ip cef
ipv6 cef
!
interface GigabitEthernet0/0/0
ipv6 address 2001:DB8:2:ABCD::2/48
ipv6 flow monitor FLOW-MONITOR-1 sampler SAMPLER-1 input

回答例:

Full NetFlowに必要なものと比較すると、CPUとメモリの使用率が低下します。

<メモ>
フローサンプラは、ルータのコンフィギュレーションで別のコンポーネントとして作成されます。フローサンプラは、分析用に選択されるパケットの数を制限することで、Flexible NetFlowを実行しているデバイス上の負荷を減らすために使用されます。

[Flexible NetFlow コンフィギュレーション ガイド、Cisco IOS XE Release 3S(ASR 1000)]
https://www.cisco.com/c/ja_jp/td/docs/rt/wanaggregationinternetedgert/asr1000aggregationservsrt/cg/010/fnf-xe-3s-asr1000-book-1/fnf-xe-3s-asr1000-book-1_chapter_0111.html

2.

・EIGRPとOSPFはどのように異なるか?

回答例:

EIGRP はequal または unequal パスコストをサポートし、OSPFは equal パスコストだけをサポートします。

3.

・SD-Accessソリューションにおけるフュージョンの役割は何ですか?

回答例:

ユーザー定義(user-defined)の仮想ネットワーク(VN)と共有サービス間のルートリークを実行します。

<メモ>
[Functionality of a Fusion Device in DNA SD-Access Solution]
A Fusion device enables Virtual routing and forwarding (VRF) leaking across SD-Access Fabric domains, and enables host connectivity to shared services, such as DHCP, DNS, NTP, ISE, Cisco DNA Center, Wireless LAN Controllers (WLC), and similar. While this role can be performed by other devices than routers, this document focuses on routers as Fusion devices.
As mentioned above, the shared services must be made available to all virtual networks (VN’s) on the Campus. This is achieved by creating Border Gateway Protocol (BGP) peerings from the Border Routers to the Fusion Routers. On the Fusion Router the fabric VRF’s subnets that need access to these shared services are leaked into the GRT, or a shared services VRF, and vice-versa. Route maps can be used to help contain routing tables to subnets specific to SD-Access Fabric.
[Configure Fusion Router in SDA]
https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/dna-center/213525-sda-steps-to-configure-fusion-router.html

[コンタクト]
メッセージの表題に「ENCORテキスト希望」や「仮メンバー登録希望」などコピペして頂くと助かります。
[代表メールアドレス]
onemind.it@gmail.com
[代表 Linkedin プロフィール]
https://www.linkedin.com/in/tsuchida-shunta-446aa9239/

この記事が気に入ったらサポートをしてみませんか?