NetBSD/amd64 on dynabook CX/47EE
2008年ぐらいのTOSHIBA Dynabook CX/47EEのバッテリーは充電もできないくらいになったがACアダプターで起動できるので、捨てられずにいる。Windows 7、10は動作するがPCMCIAなGP-IBカードがWindows 10では動かない(National Instrumentsの推奨動作環境から外れた)ので、NetBSD/amd64を試している。
こいつ、動くぞ。
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003,
2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013,
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023,
2024
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 10.99.10 (GENERIC) #3: Sat Mar 2 00:34:54 JST 2024
root@cx47ee.stlab.kankyo-u.ac.jp:/usr/obj/sys/arch/amd64/compile/GENERIC
total memory = 4086 MB
avail memory = 3926 MB
timecounter: Timecounters tick every 10.000 msec
Kernelized RAIDframe activated
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
ACPI: RSDP 0x00000000000F77C0 000024 (v02 TOSQCI)
ACPI: XSDT 0x00000000BF6D555E 000074 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
ACPI: FACP 0x00000000BF6DFC92 0000F4 (v03 TOSQCI TOSQCI00 06040000 ALAN 00000001)
ACPI: DSDT 0x00000000BF6D6A09 009215 (v02 TOSQCI N.Jersey 06040000 MSFT 03000001)
ACPI: FACS 0x00000000BF6E2FC0 000040
ACPI: HPET 0x00000000BF6DFD86 000038 (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
ACPI: MCFG 0x00000000BF6DFDBE 00003C (v01 TOSQCI TOSQCI00 06040000 LOHR 0000005A)
ACPI: APIC 0x00000000BF6DFDFA 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x00000000BF6DFE62 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SLIC 0x00000000BF6DFE8A 000176 (v01 TOSQCI TOSQCI00 06040000 LTP 00000000)
ACPI: SSDT 0x00000000BF6D675C 0002AD (v01 SataRe SataAhci 00001000 INTL 20061109)
ACPI: SSDT 0x00000000BF6D5B5E 00025F (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
ACPI: SSDT 0x00000000BF6D5AB8 0000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20061109)
ACPI: SSDT 0x00000000BF6D55D2 0004E6 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: 5 ACPI AML tables successfully acquired and loaded
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - Z000 (20230628/dspkginit-497)
ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - Z000 (20230628/dspkginit-497)
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 0x20, 24 pins
cpu0 at mainbus0 apid 0
cpu0: Use lfence to serialize rdtsc
cpu0: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, id 0x6fd
cpu0: node 0, package 0, core 0, smt 0
cpu1 at mainbus0 apid 1
cpu1: Intel(R) Core(TM)2 Duo CPU T7250 @ 2.00GHz, id 0x6fd
cpu1: node 0, package 0, core 1, smt 0
acpi0 at mainbus0: Intel ACPICA 20230628
acpi0: X/RSDT: OemId <TOSQCI,TOSQCI00,06040000>, AslId < LTP,00000000>
allocated pic ioapic0 type level pin 9 level 6 to cpu0 slot 0 idt entry 96
acpi0: MCFG: segment 0, bus 0-255, address 0x00000000e0000000
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDD4239605448 00027A (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDD42396CA808 0005D8 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDD4270E21A48 0000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFFDD4239614B08 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20061109)
acpi0: SCI interrupting at int 9
acpi0: fixed power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC0, PNP0C09): io 0x62,0x66
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
TVAP (TOS1900) at acpi0 not configured
HAPS (TOS620A) at acpi0 not configured
acpiwmi0 at acpi0 (QWMI, PNP0C14-1): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0100): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0410): ACPI Display Output Device
acpiout1: brightness levels: [0,14,28,42,56,70,84,100]
acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0: 0x0000: Unknown Output Device, head 0, bios detect
acpivga0: 0x0000: Unknown Output Device, head 0, bios detect
acpivga0: 0x0000: Unknown Output Device, head 0, bios detect
acpivga0: 0x0000: Unknown Output Device, head 0, bios detect
acpivga0: 0x0000: Unknown Output Device, head 0, bios detect
acpidalb0 at acpi0 (DAL1, PNP0C32-1): Direct Application Launch Button
acpidalb1 at acpi0 (DAL2, PNP0C32-2): Direct Application Launch Button
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, SYN1010) (aux port): irq 12
acpitz0 at acpi0 (THRM): cpu0 cpu1
acpitz0: levels: critical 104.0 C, passive 104.0 C, passive cooling
ACPI: Enabled 9 GPEs in block 00 to 1F
pckbd0 at pckbc1 (kbd slot)
allocated pic ioapic0 type edge pin 1 level 6 to cpu0 slot 1 idt entry 97
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pms0: Synaptics touchpad version 6.5
pms0: Palm detect, Two button click pad, Reports max, Reports min
pms0: Probed max coordinates right: 1026, top: 2074
pms0: Probed min coordinates left: 1888, bottom: 2052
allocated pic ioapic0 type edge pin 12 level 6 to cpu0 slot 2 idt entry 98
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: Intel 82965PM Host Bridge (rev. 0x03)
agp0 at pchb0: i965-family chipset
agp0: detected 7676k stolen memory
agp0: aperture at 0xd0000000, size 0x20000000
i915drmkms0 at pci0 dev 2 function 0: Intel 82965PM Integrated Graphics Device (rev. 0x03)
Intel 82965PM Integrated Graphics Device (miscellaneous display, revision 0x03) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 3 idt entry 99
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
uhci1 at pci0 dev 26 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
allocated pic ioapic0 type level pin 21 level 6 to cpu0 slot 4 idt entry 100
uhci1: interrupting at ioapic0 pin 21
usb1 at uhci1: USB revision 1.0
ehci0 at pci0 dev 26 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci0: 64-bit DMA
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 101
ehci0: interrupting at ioapic0 pin 18
ehci0: EHCI version 1.0
ehci0: 2 companion controllers, 2 ports each: uhci0 uhci1
ehci0: Using DMA subregion for control data structures
usb2 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
allocated pic msi0 type edge pin 0 level 7 to cpu0 slot 16 idt entry 112
hdaudio0: interrupting at msi0 vec 0
hdaudio0: HDA ver. 1.0, OSS 4, ISS 4, BSS 0, SDO 1, 64-bit
hdafg0 at hdaudio0: Realtek ALC268
hdafg0: DAC00 2ch: Speaker [Built-In], HP Out [Jack]
hdafg0: ADC01 2ch: Mic In [Jack]
hdafg0: 2ch/2ch 44100Hz 48000Hz 96000Hz 192000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg0: playback, capture, full duplex, independent
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for playback
audio0: slinear_le:16 2ch 48000Hz, blk 1920 bytes (10ms) for recording
spkr0 at audio0: PC Speaker (synthesized)
wsbell at spkr0 not configured
hdvsmfg at hdaudio0 not configured
ppb0 at pci0 dev 28 function 0: Intel 82801H PCI Express Port #1 (rev. 0x03)
ppb0: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 28 function 1: Intel 82801H PCI Express Port #2 (rev. 0x03)
ppb1: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8100E/8101E/8102E/8102EL PCIe 10/100BaseTX (rev. 0x01)
allocated pic msi1 type edge pin 0 level 6 to cpu0 slot 17 idt entry 102
re0: interrupting at msi1 vec 0
re0: RTL8101E (0x3400)
re0: Ethernet address 00:1e:68:2b:62:77
re0: using 256 tx descriptors
rlphy0 at re0 phy 7: RTL8201L 10/100 media interface, rev. 1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ppb2 at pci0 dev 28 function 2: Intel 82801H PCI Express Port #3 (rev. 0x03)
ppb2: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ath0 at pci3 dev 0 function 0: Atheros 5424/2424
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 101
ath0: interrupting at ioapic0 pin 18
ath0: mac 10.2 phy 6.1 radio 10.2
ath0: Use hw queue 1 for WME_AC_BE traffic
ath0: Use hw queue 0 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Use hw queue 8 for CAB traffic
ath0: Use hw queue 9 for beacons
ppb3 at pci0 dev 28 function 3: Intel 82801H PCI Express Port #4 (rev. 0x03)
ppb3: PCI Express capability version 1 <Root Port of PCI-E Root Complex> x1 @ 2.5GT/s
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
uhci2 at pci0 dev 29 function 0: Intel 82801H USB UHCI Controller (rev. 0x03)
allocated pic ioapic0 type level pin 23 level 6 to cpu0 slot 6 idt entry 103
uhci2: interrupting at ioapic0 pin 23
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 1: Intel 82801H USB UHCI Controller (rev. 0x03)
allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 7 idt entry 104
uhci3: interrupting at ioapic0 pin 19
usb4 at uhci3: USB revision 1.0
uhci4 at pci0 dev 29 function 2: Intel 82801H USB UHCI Controller (rev. 0x03)
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 101
uhci4: interrupting at ioapic0 pin 18
usb5 at uhci4: USB revision 1.0
ehci1 at pci0 dev 29 function 7: Intel 82801H USB EHCI Controller (rev. 0x03)
ehci1: 64-bit DMA
allocated pic ioapic0 type level pin 23 level 6 to cpu0 slot 6 idt entry 103
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: 3 companion controllers, 2 ports each: uhci2 uhci3 uhci4
ehci1: Using DMA subregion for control data structures
usb6 at ehci1: USB revision 2.0
ppb4 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0xf3)
pci5 at ppb4 bus 10
pci5: i/o space, memory space enabled
fwohci0 at pci5 dev 1 function 0: Ricoh 5C832 PCI-SD/MMC/MMC+/MS/xD/Firewire (rev. 0x05)
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 3 idt entry 99
fwohci0: interrupting at ioapic0 pin 16
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:1b:24:00:00:c4:29:81
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
fwohci0: Clear PME# now
sdhc0 at pci5 dev 1 function 1: Ricoh 5C822 PCI-CardBus Bridge/MS/SD/MMC/SC (rev. 0x22)
allocated pic ioapic0 type level pin 17 level 6 to cpu0 slot 8 idt entry 105
sdhc0: interrupting at ioapic0 pin 17
sdhc0: SDHC 1.0, rev 4, caps <01e021a1/00000000>, SDMA, 33000 kHz, HS 3.3V, 512 byte blocks
sdmmc0 at sdhc0 slot 0
Ricoh 5C843 PCI-CardBus Bridge/SD/MMC/MMC+/MS/xD/Firewire (miscellaneous system, revision 0x12) at pci5 dev 1 function 2 not configured
Ricoh 5C592 PCI-CardBus Bridge/MS/SD/Firewire (miscellaneous system, revision 0x12) at pci5 dev 1 function 3 not configured
Ricoh xD-Picture Card Controller (miscellaneous system, revision 0x12) at pci5 dev 1 function 4 not configured
cbb0 at pci5 dev 4 function 0: ENE Technology CB1410 CardBus Controller (rev. 0x01)
cbb0: cacheline 0x10 lattimer 0x20
cbb0: bhlc 0x22010
allocated pic ioapic0 type level pin 18 level 6 to cpu0 slot 5 idt entry 101
cbb0: interrupting at ioapic0 pin 18
cardslot0 at cbb0
cardbus0 at cardslot0: bus 11 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
ichlpcib0 at pci0 dev 31 function 0: Intel 82801HBM LPC Interface Bridge (rev. 0x03)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
tco0 at ichlpcib0: TCO (watchdog) timer configured.
tco0: Min/Max interval 1/367 seconds
piixide0 at pci0 dev 31 function 1: Intel 82801HBM IDE Controller (ICH8M) (rev. 0x03)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
allocated pic ioapic0 type edge pin 14 level 6 to cpu0 slot 9 idt entry 106
piixide0: primary channel interrupting at ioapic0 pin 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
allocated pic ioapic0 type edge pin 15 level 6 to cpu0 slot 10 idt entry 107
piixide0: secondary channel interrupting at ioapic0 pin 15
atabus1 at piixide0 channel 1
ahcisata0 at pci0 dev 31 function 2: Intel 82801HBM AHCI SATA Controller (rev. 0x03)
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.10, 3 ports, 32 slots, CAP 0xe720ff82<CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
allocated pic msi2 type edge pin 0 level 6 to cpu0 slot 18 idt entry 108
ahcisata0: interrupting at msi2 vec 0
atabus2 at ahcisata0 channel 0
atabus3 at ahcisata0 channel 1
atabus4 at ahcisata0 channel 2
ichsmb0 at pci0 dev 31 function 3: Intel 82801H SMBus Controller (rev. 0x03)
allocated pic ioapic0 type level pin 19 level 6 to cpu0 slot 7 idt entry 104
ichsmb0: interrupting at ioapic0 pin 19
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
pcppi0 at isa0 port 0x61
spkr1 at pcppi0: PC Speaker
wsbell at spkr1 not configured
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: FFH, lat 1 us, pow 1000 mW
acpicpu0: C2: FFH, lat 1 us, pow 500 mW
acpicpu0: C3: FFH, lat 57 us, pow 100 mW, bus master check
acpicpu0: P0: FFH, lat 10 us, pow 35000 mW, 2001 MHz, turbo boost
acpicpu0: P1: FFH, lat 10 us, pow 35000 mW, 2000 MHz
acpicpu0: P2: FFH, lat 10 us, pow 25000 mW, 1600 MHz
acpicpu0: P3: FFH, lat 10 us, pow 16000 mW, 1200 MHz
acpicpu0: P4: FFH, lat 10 us, pow 14000 mW, 800 MHz
acpicpu0: T0: FFH, lat 1 us, pow 14000 mW, 100 %
acpicpu0: T1: FFH, lat 1 us, pow 12250 mW, 88 %
acpicpu0: T2: FFH, lat 1 us, pow 10500 mW, 75 %
acpicpu0: T3: FFH, lat 1 us, pow 8750 mW, 63 %
acpicpu0: T4: FFH, lat 1 us, pow 7000 mW, 50 %
acpicpu0: T5: FFH, lat 1 us, pow 5250 mW, 38 %
acpicpu0: T6: FFH, lat 1 us, pow 3500 mW, 25 %
acpicpu0: T7: FFH, lat 1 us, pow 1750 mW, 13 %
coretemp0 at cpu0: thermal sensor, 1 C resolution, Tjmax=100
acpicpu1 at cpu1: ACPI CPU
coretemp1 at cpu1: thermal sensor, 1 C resolution, Tjmax=100
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0 cable IRM irm(0) (me)
ieee1394if0: bus manager 0
timecounter: Timecounter "lapic" frequency 199500000 Hz quality -100
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1995000000 Hz quality -100
IPsec: Initialized Security Association Processing.
uhub0 at usb0: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb2: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
uhub3 at usb3: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb4: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
uhub5 at usb5: NetBSD (0x0000) UHCI root hub (0x0000), class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
acpiacad0: AC adapter online.
uhub6 at usb6: NetBSD (0x0000) EHCI root hub (0x0000), class 9/0, rev 2.00/1.00, addr 1
uhub6: 6 ports with 6 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <MATSHITADVD-RAM UJ-852S, HE17 093180, 1.80> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
ehci1: handing over full speed device on port 1 to uhci2
ahcisata0 port 1: PHY offline
ehci1: handing over full speed device on port 5 to uhci4
wd0 at atabus2 drive 0
wd0: <ADATA SP600>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 238 GB, 496149 cyl, 16 head, 63 sec, 512 bytes/sect x 500118192 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100), WRITE DMA FUA, NCQ (32 tags)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA), NCQ (31 tags)
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 26 flags 0 maxoplen 0
crypto: driver 0 registers alg 27 flags 0 maxoplen 0
crypto: driver 0 registers alg 29 flags 0 maxoplen 0
crypto: driver 0 registers alg 33 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 19 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 20 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 24 flags 0 maxoplen 0
crypto: driver 0 registers alg 25 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 21 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 28 flags 0 maxoplen 0
crypto: driver 0 registers alg 30 flags 0 maxoplen 0
crypto: driver 0 registers alg 31 flags 0 maxoplen 0
crypto: driver 0 registers alg 32 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
crypto: driver 0 registers alg 23 flags 0 maxoplen 0
crypto: driver 0 registers alg 22 flags 0 maxoplen 0
swwdog0: software watchdog initialized
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
kern.module.path=/stand/amd64/10.99.10/modules
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
allocated pic ioapic0 type level pin 16 level 6 to cpu0 slot 3 idt entry 99
i915drmkms0: interrupting at ioapic0 pin 16 (i915drmkms0)
[drm] Initialized overlay support.
[drm] Initialized i915 1.6.0 20200114 for i915drmkms0 on minor 0
intelfb0 at i915drmkms0
[drm] DRM_I915_DEBUG enabled
[drm] DRM_I915_DEBUG_GEM enabled
intelfb0: framebuffer at 0xd0020000, size 1280x800, depth 32, stride 5120
wsdisplay0 at intelfb0 kbdmux 1: console (default, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uplcom0 at uhub3 port 1
uplcom0: Prolific Technology Inc. (0x067b) USB-Serial Controller (0x2303), rev 2.00/3.00, addr 2
ucom0 at uplcom0
ugen0 at uhub5 port 1
ugen0: STMicroelectronics (0x0483) Biometric Coprocessor (0x2016), rev 1.00/0.01, addr 2
wsdisplay0: screen 1 added (default, vt100 emulation)
wsdisplay0: screen 2 added (default, vt100 emulation)
wsdisplay0: screen 3 added (default, vt100 emulation)
wsdisplay0: screen 4 added (default, vt100 emulation)というのはサテオキ、wsmouse0 at pms0として認識されているSynaptics touchpad version 6.5をマウスとして使えないので困る。USB接続なマウスを使うと操作できるけど、タッチパッドでできたらいいなぁ。
この記事が気に入ったらサポートをしてみませんか？