PA System M/S Amplifier Switch RH2821M

※ Connect to 5 main amplifiers and 1 spare amplifier.
※ Automatic detection of fault units,and the first fault detected unit will be
automatically switched to the spare unit,other fault units if later detected
will be brought to your attention by the indicators.
※ Prompt tone will ring should any main unit fails.
※ Indicators have three different indications:Normal,Fault,or Spare.
※ Address setting using decimal system.
Description
The Main/Spare Amplifier Switch RH2821M monitors up to five main amplifiers in the pa system,RH2821Mwhich will be switched automatically to the spare amplifier should any one fails,with five independent channels, it can also be operated manually for power switching amplifier upgrades and maintenance, each channel has a volume control, manual switch,and status indicator.
Note:
• Only one main amplifier is used in above connection,the Main/Spare Amplifier Switch RH2821M can support connecting five main amplifiers in the same time.
• Make sure the terminals of "+" and "COM" are connected correctly to match each other between the devices.
Specification
Model RH2821M
Main Channels 5 channels 'CH1~ CH5'Phone signal
Spare Channel One
Channel Capacity 150V/20A,audio signal
Input Signal 0.775V(0dB),10k ohms,unbalanced
Output Signal 0.775V(0dB),10k ohms,unbalanced
Cycle Time 20mS,cycle times 30
Input Checking 50mV,cycle time 20mS
Output Checking 100mV,cycle time 20mS
Speaker Terminals Speaker output (CH1-CH5)
Power Cable (3×0.5 mm2)×1.5M
Power Supply AC 220V ± 10% 50-60Hz
Power Consumption 20~ 25W
Dimension 89(H)×483(W)×350(D)mm
Packing Size  185(H)×520(W)×435(D)mm
Net Weight 6.9kg
Gross Weight 8.1kg
RH-AUDIO develops, manufactures, and markets highly reliable sound products of Commercial Sound System.