Keito's Twin-Set Pullover

This pattern is sized to fit the body of "Knit Doll Keito”.
Keito’s Body Size
Height 37cm(to the toes)
Bust 18cm
Waist 13cm
Hips 18cm
Foot 3.5cm
This is a set pattern for pullover and cardigan. The inner pullover is designed to tight fit doll body, assuming doll will wear it as a set.

Materials
◆Yarn: Light Fingering weight yarn
About the yarn used: In order to express clothes in doll size, I use yarn that do not thicken the knitted fabric. I think a soft yarn that does not have a strong twist is suitable.
—————————————————————————————————————
Yarn used in this pattern: HIGHLAND WOOL/ISAGER
100% Wool, 26sts 30rows/(3mm needles)
—————————————————————————
Gauge was measured after blocking.
My gauge(Stocking stitch): 7.5sts 10rows/2.5cm(2.75mm needles)
Amount of yarn I actually used: 6g/33m
Adjust the size of the needle as needed to get the above gauge.

Needles　　　　　　　　　　　　　　　　　　　　　　　　　　　　◇2.75mm(Cast On)
◇2.5mm DPNs
◇2.75 DPNs
◇3.5mm(Bind Off)

Tools　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　◇Stitch Marker (Use as needed)
◇Crochet Hook (For picking up yarn)
◇Tapestry Needle
◇Scissors
◇Scrap Yarn

Method　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　◇Longtail Cast On
◇Forward Loop Cast On                                                                       ◇Wrap&Turn
[a]w&t(RS)/Wrap and Turn on the right side.
1.Bring the yarn to the front.
2.Slip next stitch purlwise from the left needle to the right needle.
3.Take the yarn to the back.
4.Return the 1 stitch of the right needle to the left needle.
5.Turn.
[b]w&t(WS)/Wrap and Turn on the wrong side.
1.Take the yarn to the back.
2.Slip next stitch purlwise from the left needle to the right needle.
3.Bring the yarn to the front.
4.Return the 1 stitch of the right needle to the left needle.
5.Turn.
[c]pickup&k2tog(RS)
Pick up the wrapped stitch with the right needle from the bottom.
Then knit it together with the 1 stitch of the left needle. Same as k2tog.
[d]pickup&p2tog(WS)
Pick up the wrapped stitch with the right needle from the bottom.
Then knit it together with the 1 stitch of the left needle. Same as p2tog.

Abbreviations　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　BOR - beginning of round
k - knit
p - purl
k2tog - knit 2stitches together
p2tog - purl 2stitches together
m1L - make one left stitch
m1R - make one right stitch
ssk - slip slip knit
sl1k - slip one knitwise

Notes

The process of making this pullover begins from the neck, and in the middle of the process, the stitches are divided into the sleeves and knitted toward the hem.

 The left and right sleeves have the same pattern. There is a photo on my blog that explains how to knit armhole. See also that. 　

How to knit Armhole | Knit Doll Keito

Pattern/Body

[Using 2.75mm Needle] Longtail Cast On 44sts
Leave a 10cm yarn-tail for finishing.
Round1 [Using 2.5mm DPNs] Distribute 44sts to 3DPNs.
Circular knitting from here.
(K2, p2)11times, BOR
Round2 (k2, p2)11times
Round3 (k2, p2)11times
Round4 [Change the needle size to 2.75mm]
Reposition the BOR to make the neck rib pattern symmetrical.
k43, BOR(The beginning of the round is in the center of the back body.), Move the remaining 1 stitch to the left needle.
Round(Row)5 k6, [a]w&t(RS)
Round(Row)6 p6, BOR, p6, [b]w&t(WS)
Round(Row)7 k6, BOR, k6, [c]pickup&k2tog(RS), k4, [a]w&t(RS)
Round(Row)8 p11, BOR, p6, [d]pickup&p2tog(WS), p4, [b]w&t(WS)
Round(Row)9 k11, BOR
Round10 k11, [c]pickup&k2tog(RS), k20, [c]pickup&k2tog(RS), k11
Round11 k3, m1L, k5, (m1R, k6, m1L), k5, m1R, k6, m1L, k5, (m1R, k6, m1L), k5, m1R, k3
Round12 k52
Round13 k52
Round14 k3, m1L, k6, (m1R, k8, m1L), k6, m1R, k6, m1L, k6, (m1R, k8, m1L), k6, m1R, k3
Round15 k60
Round16 k60
Round17 k3, m1L, k7, (m1R, k10, m1L), k7, m1R, k6, m1L, k7, (m1R, k10, m1L), k7, m1R, k3
Round18 k68
Round19 k68
Round20 k11, m1R, k12, m1L, k22, m1R, k12, m1L, k11
Round21 k72
Round22 k72
Round23 Divide for sleeves.
K11, Move next 14sts to scrap yarn, Forward Loop Cast On 2sts, k22, Move next 14sts to scrap yarn, Forward Loop Cast On 2sts, k11
Round24 k48
Round25 k48
Round26 k48
Round27 k48
Round28 k48
Round29 k48
Round30 k48
Round31 k48
Round32 k9, (k2tog, k2, ssk), k18, (k2tog, k2, ssk), k9
Round33 k44
Round34 k44
Round35 k44
Round36 k8, (k2tog, k2, ssk), k16, (k2tog, k2, ssk), k8
Round37 k40
Round38 k40
Round39 k40
Round40 k8, (m1L, k4, m1R), k16, (m1L, k4, m1R), k8
Round41 k44
Round42 k44
Round43 k9, (m1L, k4, m1R), k18, (m1L, k4, m1R), k9
Round44 k48
Round45 k48
Round46 (k2, p2)12times
Round47 (k2, p2)12times
Round48 (k2, p2)12times
Finish Bind off 2×2 Rib, with 3.5mm needle.
Cut the yarn, leaving 10cm yarn-tail and weave it into the stitches to finish.                                                                                                                                                                                                              

Pattarn/Sleeves

Round1[Using 2.75mmDPNs] Distribute the 11sts from scrap yarn onto 3DPNs. Clock-wise from the underarm, in the order of “5, 4, 5”.               ◇Pick up 2sts from the underarm with new yarn.Using a crochet hook makes it easy. Leave 10cm yarn-tail for closing hole.                                                ◇Join the underarm-stitch and body-stitch.
Knit using the DPN that picked up the underarm-stitches.
1)Follow the sinker loop of the first stitch of the leftDPN to the right, and
pick up the loop from the back with the leftDPN.
2)knit the first stitch of the leftDPN and the stitch picked up together.
Same as k2tog. And k4
◇Next needle. k4
◇Next needle. k4, sl1k
◇Join the body-stitch and underarm-stitch.
1)yarn-tail is put out to the outside.
2)Find the yarn that across under the first stitch in the next needle.
3)Insert crochet hook from under the yarn and pick up the working yarn.
4)Twist the stitch and move to the rightDPN.
5)And then cover the it with the slipped stitch.
Knit 1 more stitch with same needle. Pull the yarn-tail of the underarm joint to
prevent the stitches from loosening. BOR(The beginning of the round is in the center of the underarm.)
Round2 k16
Round3 k16
Round4 (k2, p2)4times
Round5 (k2, p2)4times
Round6 (k2, p2)4times
Finish Bind off 2×2 Rib, with 3.5mm needle.
Cut the yarn, leaving 10cm yarn-tail and weave it into the stitches to finish.

Weave all yarn-tails into the stitches. And blocking.

©️2021 nioknits