Fortuna 50 w/o feed clutch feed shaft disassembly Dejima Auto Tuning 2024年1月1日 05:28 loosen nut, Remove pulley loosen cover nut, remove remove key remove distance collar bearing is there but can't be pull from this side. remove the rod for shaft lock there is a step on feed shaft, just before gearbox pry shaft toward pulley side by using 14mm spanner. Then use another spanner for spacer and pry... ...until baring poping out. Be careful not to disturb the internal of gearbox. You may dislocate the pinion gear. Now bearing will come out by some puller Assembly is the reverse of disassembly. collar first, then key, cover nut, you'll need the locking rod which does not be seen in pic pulley. Don't forget remove the locking rod from hole #革漉き機 #Fotuna