TC Seal

TC materials have features of high hardness, strength, abrasion resistance and corrosion resistance. It is known as “Industrial Tooth”. Due to its superior performance, it has been widely used in military industry, aerospace, mechanical processing, metallurgy, oil drilling, electronic communication, architecture and other fields. For example, in pumps, compressors and agitators,TC sealsare used asmechanical seals. Good abrasion resistance and high hardness make it suitable for the manufacture of wear-resistant parts with high temperature, friction and corrosion.
 
Categories of TC Seal Material
According to its chemical composition and usage characteristics, TC can be divided into four categories: tungsten cobalt (YG), tungsten-titanium (YT), tungsten titanium tantalum (YW), and titanium carbide (YN).
 
Tungsten cobalt (YG) hard alloy is composed of WC and Co. It is suitable for processing brittle materials such as cast iron, nonferrous metals and non-metallic materials.
 
Stellite (YT) is composed of WC, TiC and Co. Due to the addition of TiC to the alloy, its wear resistance is improved, but the bending strength, grinding performance and thermal conductivity have decreased. Because of its brittleness under low temperature , it is only suitable for high-speed cutting general materials and not for the processing of brittle materials.
 
Tungsten titanium tantalum (niobium) cobalt (YW) is added to the alloy to increase the high temperature hardness, strength and abrasion resistance through appropriate amount of tantalum carbide or niobium carbide. At the same time, the toughness also is improved with better comprehensive cutting performance. It is mainly used for hard cutting materials and intermittent cutting.
 
The carbonized titanium base class (YN) is a hard alloy with the hard phase of TiC, nickel and molybdenum. Its advantages are high hardness, anti - bonding ability, anti - crescent wear and anti - oxidation ability. At a temperature of more than 1000 degrees, it can still be machined. It is applicable to the continuous-finishing of alloy steel and quenching steel.
 
Material Property of TC Seal
Sealcon mainly selects the materials of YN and YG series to provide customers with high quality TC Seal service.
 
model
nickel content（wt%）
density(g/cm²)
hardness(HRA)
bending strength(≥N/mm²)
YN6
5.7-6.2
14.5-14.9
88.5-91.0
1800
YN8
7.7-8.2
14.4-14.8
87.5-90.0
2000
 
model
cobalt content（wt%）
density(g/cm²)
hardness(HRA)
bending strength(≥N/mm²)
YG6
5.8-6.2
14.6-15.0
89.5-91.0
1800
YG8
7.8-8.2
14.5-14.9
88.0-90.5
1980
YG12
11.7-12.2
13.9-14.5
87.5-89.5
2400
YG15
14.6-15.2
13.9-14.2
87.5-89.0
2480
YG20
19.6-20.2
13.4-13.7
85.5-88.0
2650
YG25
24.5-25.2
12.9-13.2
84.5-87.5
2850
 
More kinds of hydrocarbon pump mechanical seal, please visit our website.